Water softener and filtration installation in Chicagoland
Chicago-area water is hard. Lake Michigan water tests at roughly 8 grains per gallon, and towns on well water are often much harder. You see it as white crust on faucets and showerheads, spots on dishes, and soap that won't lather. What you don't see is the scale building up inside your water heater, dishwasher, and washing machine. J.D. Rusu Plumbing installs water softeners and filtration systems across Chicago and the suburbs, piped properly by a licensed plumber.
Start with a free water test
We don't guess. We test your water at your kitchen sink for hardness, chlorine, and total dissolved solids, and show you the results on the spot. It takes about ten minutes, there is no charge, and you get the numbers in writing whether you buy anything or not. Call or text (773) 682-9155 to set one up, or ask for it during any service call.
Signs you have hard water
- White or chalky buildup on faucets, showerheads, and glass shower doors
- Spotty dishes and cloudy glassware straight out of the dishwasher
- Dry skin and dull hair, and soap or shampoo that doesn't lather well
- Stiff, faded laundry
- A water heater that rumbles or pops, or runs out of hot water sooner than it used to
- Faucet aerators and showerheads that keep clogging
Three ways we fix your water
Every home gets a clear, upfront price for each option after the water test. You pick what fits.
1. Soft Water
A metered water softener sized to your home and your water. It removes the calcium and magnesium that cause scale, so fixtures stay clean and your water heater and appliances last longer. Includes the bypass, drain, programming, and a water test before and after.
2. Soft Water + Drinking Water
The softener, plus a reverse osmosis system under the kitchen sink with its own faucet for drinking and cooking water. This is the setup most families choose.
3. Whole Home
The softener and drinking water system, plus a whole-house carbon filter that reduces chlorine taste and smell at every tap and shower in the house.
We install professional-grade equipment with separate resin and salt tanks and control valves that can be serviced and rebuilt, not sealed one-piece units. Already bought a softener or filter? We install customer-supplied units too, and we'll tell you before we start if it's the wrong size for your home.
Drinking water, chlorine, and lead
A softener is not a filter. It takes out hardness minerals, and that's all. Taste, smell, and what's in your drinking water are handled by filtration:
- Reverse osmosis systems go under the kitchen sink and treat the water you drink and cook with. We install systems certified to NSF/ANSI Standard 58, and can run a line to the fridge and ice maker.
- Whole-house carbon filters reduce chlorine taste and odor throughout the house.
- Sediment filters catch sand, rust, and grit before they reach fixtures and appliances.
Many older homes in Chicago and the inner suburbs are still connected to the water main by a lead service line. If that's a concern in your home, ask us about reverse osmosis systems certified for lead reduction. Chicago residents can also request a free lead test kit from the city by calling 311.
How we install a water softener
- Test your water. We check the hardness so the softener is sized on real numbers, not a guess.
- Size the system. Capacity is matched to your water hardness and how many people live in the house. Too small and it regenerates constantly. Too big and you've overpaid.
- Pipe it in properly. We tie into the main water line with a bypass so the softener can be serviced without shutting off the house. If there's no softener loop, we build one. Outside hose spigots are typically left on unsoftened water so you aren't paying to soften the lawn.
- Run the drain to code. The discharge line gets a proper air gap, as the Illinois Plumbing Code requires, so wastewater can never siphon back into the unit.
- Program and test. We set the hardness and regeneration schedule, run a cycle, and check every connection for leaks.
Most installs take about half a day, and your water is off for only part of that.
Softener repair and yearly service
We troubleshoot softeners that have stopped working: units that don't use salt, salt bridges in the brine tank, valves stuck in regeneration, and leaking connections. If the unit is worn out and a repair isn't worth it, we'll replace it and haul the old one away. We also offer a yearly service visit to change drinking water filters, check and clean the softener, and retest your water.
